#ITHACA MODEL 49 SINGLE SHOT SERIES#
#ITHACA MODEL 49 SINGLE SHOT FREE#

Pull slide, breechblock (52), and carrier (42) together to rear, out of receiverĦ Positive extractor (47) is retained by a powerful spring. Hold receiver bottom up with magazine to left, and with punch or fingernail pull slide pin (33) toward body until slide bar can be pulled forward from engagement with slide (35). Remove 2 carrier screw lock screws (56) and carrier screws (55) from receiver. Stock is attached to receiver by a long bolt (26) which has a square head with slot so that it can be removed with a long screwdriver or socket wrenchĥ With stock removed, remove trigger plate screw (17) and pull trigger plate group to rear and out of receiver. First remove butt-plate screws and buttplate. Magazine tube and slide handle assembly remain attached to receiverĤ Slock (53) must be removed before disassembling action.

#ITHACA MODEL 49 SINGLE SHOT FREE#

give barrel 14-turn in direction shown and pull it free of receiver. The 5-shot magazine is easily plugged to conform with Federal law.ģ Barrel is joined to receiver by an interrupted thread. Barrel lengths range from 20' for the riot gun, to 30' for trap or duck hunters. Model 37 Featherlight shotguns arc made in 20-, 16-, and 12-ga. Stalled in place of the normal right-hand safety. simply rotate magazine nut in direction shown) (Magazine nut pin furnished only on guns built prior to 1955. Pull up magazine nut pin (2) and use it as a lever to rotate magazine nut (3) until projection on it is free of barrel lug. Ithaca makes a left-hand safety that can be easily in-Ģ To remove barrel (1), pull back on slide release on forward side of trigger guard and puli slide handle assembly (12) to rear to open breech. Since ejection is downward, the Featherlight is a great favorite with left-handed shooters. This system also provides a good safety factor since it protects the face from brass particles or powder burns resulting from defective-shell bursts. Pull back on slide release on forward side of trigger guard and pull back slide handle to empty chamber handled normally. To empty magazine, push in spring shell stop (13) on inside of receiver as shown. When the end of the bolt is locked into the top of the receiver, the slide supports it from below to prevent unlocking.Īnother good design feature is the bottom ejection system which prevents rain from getting into the gun whenġ Before attempting to remove barrel, unload magazine and chamber. The slide tips the end of the bolt up as it is pulled forward. The number of operating parts was kept to a minimum and they were lightened where possible.Īs with most slide-action shotguns, the bolt has no locking lugs or separate locking block. This weight reduction was accomplished by clever design rather than by the use of light alloys. It won immediate acclaim since it was a good pound lighter than its nearest competitor. The Featherlight was first offered in 1937. Although they have manufactured M1911A1 automatic pistols, M6 survival weapons, and M3A1 sub-machine guns under World War II government contracts, and are currently producing a cal.22 rifle, their reputation has been built on their trap guns, their double-barrel guns, and the Model 37 Featherlight slide- action shotgun.

#ITHACA MODEL 49 SINGLE SHOT SERIES#

hammer gun, and from this they evolved a series of single- and double-barrel shotguns. Y., started manufacturing guns in a small wood building on the banks of Fall Creek in 1880. Hoffschmidt Ithaca Model 37 Featherlight Shotgun If he did so, he failed to patent it, and the claim is generally disregarded today.- Harold L. Finally, Manton's friends also advanced him as having developed the true percussion cap. Mantón was soon able to put his lock into production. Again Forsyth sued, but his patent was about to expire, ancl although the court found in his favor. M ton turned to the tube lock and obtained a patent on it in 1818. In 1816 he patented a percussion pellet lock which Forsyth claimed was an infringement on his patent, and in the suit which followed Forsvth won. Most controversial of all were Manton's contributions to the development of the percussion ignition system. Less popular were his V-shapcd priming pan and his gravitational safety stop designed to prevent the accidental discharge of a gun while a chargc was being rammed home. Perhaps the most widely acccptcd of Manton's designs was the elevated rib for sighting double-barrel arms, and second was his patent brccch complete with drain hole, which made it possible for double-barrel guns to be constructed in a more streamlined form. A number of these improvements met with little favor despite their virtues, and a few led to litigation ancl considerable controversy.

Ithaca model 49 single shot